FYNE AUDIO F1-5
€4,699.00
Παράδοση σε 1-3 μέρες
Surrounded by FyneFlute rubber surround, the F1-5 features a 125mm IsoFlare low frequency driver mated to a 19mm magnesium dome compression tweeter to create a point source, time aligned transducer delivering pure isotropic radiation across the entire audio spectrum. Hand finished with care at Fyne Audio’s UK manufacturing facility in stunning real walnut veneer with burr walnut inlay, the F1-5 is the pinnacle of UK Hi-Fi loudspeaker design distilled into a sumptuous compact bookshelf speaker design.
https://www.fyneaudio.com/product/f1-5/
| System Type | 2 way, downwards firing port, with BassTrax Tractrix diffuser* |
| Recommended amplifier power (Watt RMS) | 30 – 100 |
| Peak power handling (Watt) | 200 |
| Continuous power handling (Watt RMS) | 50 |
| Sensitivity (2.83 Volt @ 1m) | 87dB |
| Nominal impedance | 8 Ohm |
| Frequency response (-6dB typical in room) | 48Hz – 38kHz |
| Drive unit complement | 1 x 125mm IsoFlare point source driver, multi-fibre bass/ midrange cone, FyneFlute surround with 19mm magnesium dome compression tweeter, neodymium magnet system |
| Crossover frequency | 1.9kHz |
| Crossover type | Single wired passive low loss, 2nd order low pass, 1st order high pass. Deep Cryogenically Treated |
| System adjustments | Presence (2.5kHz – 5.0kHz) +/- 3dB |
| Dimensions – HxWxD | 321 x 186 x 289mm (12.6 x 7.3 x 11.4”) |
| Net Weight – Each | 5.7kg (12.6lbs) |
| Finishes | Piano Gloss Walnut |
| S-Trax Position (from cabinet front edge) | 38mm (1.5″) |
